Editorial Insight
The IRS has grown more aggressive about worker-classification audits every tax year, and the penalties stack fast: back payroll taxes, interest, and FLSA minimum-wage violations can follow a single misclassified crew. If your "subs" wear your branded shirts, drive your trucks, and set schedules through your office, a classification challenge is a real risk — not a hypothetical one.
If you run an HVAC company, plumbing operation, roofing crew, or any other trade business and you’re thinking about your next hire, the employee vs. subcontractor decision is probably the question you keep putting off. Most trade business owners hit this exact crossroads somewhere between $250,000 and $1 million in annual revenue. Getting it wrong can cost tens of thousands in back taxes, penalties, and lawsuits.
This guide gives you a plain-English breakdown of the W-2 employee vs. 1099 subcontractor decision: what each classification actually means, the real numbers, the real risks, and a decision checklist you can keep and use on every future hire.
This article covers general business factors, not legal or tax advice. Consult your CPA or attorney for guidance specific to your state and situation.
W-2 Employee vs. 1099 Subcontractor: What the IRS Actually Looks At
The IRS uses a three-part test to determine whether a worker is a W-2 employee or a 1099 independent contractor. Courts and state labor agencies have their own versions, but the IRS framework is a practical starting point.
Behavioral control: Do you control how the worker does the job — not just the end result, but when, where, and how? If you set their daily schedule, tell them which tools to use, and require them to follow your specific processes step by step, that points toward an employee.
Financial control: Does the worker have their own investment in tools and equipment? Do they actively work for other clients? Can they make a profit or take a loss on individual jobs? Independent contractors typically answer yes to all three.
Type of relationship: Is there a written contract describing an ongoing arrangement? Do you offer anything resembling benefits — paid time off, health coverage, a company vehicle? Is this person doing your core service (the thing you get paid for)? A permanent, ongoing relationship doing your primary trade work looks like employment regardless of what you call it.
The IRS has full guidance on each factor at IRS.gov. If you read it and still aren’t sure, that’s the signal to call your CPA before you issue a single 1099.
Hiring W-2 Employees: Pros, Cons, and True Cost
Why Employees Work for Many Trade Businesses
Full operational control. You set their schedule, their uniform, their workflow, their truck routes. If you want your tech on-site at 7 a.m. in a branded shirt and van, that’s entirely legal with an employee — and not legal to mandate with a sub.
Consistency and retention of training. An employee shows up for your jobs, not a competitor’s. You invest in training them your way, and that investment stays with your company. Reliability compounds over time.
Brand representation at the job site. Customers interact with your employee as if they’re interacting with you. That consistency matters for reviews, referrals, and repeat business.
Where Employees Cost You
The true hourly cost is higher than the wage. This is the number most owners underestimate. A technician earning $25/hour costs you closer to $31–$36/hour in reality once you account for:
- Payroll taxes: ~7.65% FICA employer share
- Workers’ comp insurance: varies by trade, but typically 5–15% of wages for field workers
- General liability allocation
- Any benefits (even just paid holidays and sick days add up)
A $25/hr wage plus a 25% burden rate brings your true cost to roughly $31.25/hour. At a 30% burden rate, it’s $32.50. Know your number before you quote jobs.
Administrative work. Payroll withholding, quarterly tax deposits, year-end W-2s, workers’ comp audits — these are real time costs, especially for owners who do their own books.
Fixed payroll in slow weeks. Employees expect a paycheck regardless of your job volume.
Engaging 1099 Subcontractors: Pros, Cons, and Real Risks
Why Subcontractors Work for Many Trade Businesses
Lower administrative overhead (when done right). You pay the agreed amount; they handle their own taxes, insurance, tools, and equipment. No payroll taxes on your end — but documentation is critical.
Built-in flexibility. You bring subs in for peak season, specialty work, or overflow jobs and scale back without the complexity of a layoff or termination.
Specialized skills for specific jobs. Need an electrician for one HVAC install? A licensed plumber for one roofing job? A sub with that license is often cleaner than adding a full-time employee you don’t need year-round.
Where Subcontractors Create Risk
You cannot control them like employees. You can tell them what outcome you need. You cannot legally mandate when they arrive, what van they drive, or what uniform they wear. If you need that level of control, you need an employee.
Their schedule is not yours. A good sub works for other clients — including your competitors. They can decline your job on short notice. That availability risk is real.
Misclassification is expensive. If the IRS or your state’s labor department determines you misclassified an employee as a subcontractor, you can owe the full employer payroll tax portion, the employee portion that wasn’t withheld, interest, and penalties — plus potential civil exposure. The IRS Voluntary Classification Settlement Program exists specifically because this mistake is common.
Insurance gaps can become your problem. A subcontractor must carry their own general liability and workers’ comp. If they don’t — and they get hurt or damage something on your job — your policy may be on the hook. Collect a Certificate of Insurance (COI) before the first day of work, and set a calendar reminder for when it expires.
Employee vs. Subcontractor Decision Checklist for Your Trade Business
Copy this and use it for every hiring decision.
Use a W-2 employee when:
- You set their daily schedule and required start/end times
- You supply their primary tools, vehicle, or materials
- They work exclusively or primarily for your business
- The work is your core service (HVAC installs, plumbing repairs, electrical, cleaning, etc.)
- You need to train them in your specific processes and retain that training investment
- You need consistent branding (uniform, truck wrap, company email, company phone)
- They have no meaningful independent business presence or other clients
Use a 1099 subcontractor when:
- They set their own hours and can legitimately decline jobs
- They supply their own tools, truck, and equipment
- They actively work for multiple clients (not just you)
- You need a specialty skill for a specific project, not ongoing core work
- They carry their own general liability and workers’ comp (COI in hand before job starts)
- A written subcontractor agreement is in place covering scope, pay, ownership, and tax responsibility
- The relationship is clearly project-based, not an indefinite ongoing arrangement
Quick IRS factor worksheet:
| Question | Points to employee | Points to sub |
|---|---|---|
| Do I control their daily schedule? | Yes | No |
| Do I supply their primary tools? | Yes | No |
| Do they work exclusively for me? | Yes | No |
| Do I train them in my specific methods? | Yes | No |
| Do they have their own business entity (LLC, sole prop with other clients)? | No | Yes |
| Do they carry their own insurance? | No | Yes |
If the left column outnumbers the right, talk to your CPA before you send the first 1099.
Common Mistakes Trade Business Owners Make
Calling a full-time helper a subcontractor. This is the most common — and most expensive — mistake in the trade industry. If someone works 40 hours a week for you, follows your schedule, and uses your tools, they’re almost certainly an employee under any reasonable legal test, regardless of what your contract says.
No written agreement. Whether you’re hiring W-2 or engaging a sub, put the terms in writing. For subcontractors, a written agreement should specify scope, payment terms, who owns the deliverable, liability for their own taxes, and insurance requirements.
Skipping the COI collection. A subcontractor without active workers’ comp coverage who gets injured on your property can leave you exposed through your own policy or as a direct claim. Collect the COI before day one and track expiration dates.
Mixing classifications on the same role. You cannot pay someone as a 1099 in January and a W-2 in March for the same duties without a material change in the working relationship. Classification inconsistency is a red flag in an audit.
Managing a Growing Team With Field Service Software
Once you’re past the solo or two-person stage — whether you’re coordinating W-2 techs, a roster of regular subs, or a mix of both — scheduling and dispatching by phone and spreadsheet breaks down fast.
Field service management (FSM) software is built exactly for this stage:
- For W-2 employees: Timesheets, mobile clock-in/clock-out, job assignment, and route optimization keep your payroll data accurate and your crew moving efficiently.
- For subcontractors: You can assign jobs, track completion status, and manage payment without giving subs access to your full client records. Many platforms support sub-specific access levels.
Jobber is a strong fit for trade businesses with one to twenty field workers. It handles quoting, scheduling, dispatching, and payment collection in one place — and it works whether your team is employees, subs, or both. For a broader look at the leading tools in this space, see our best field service software guide.
The Easier Way: Run Your Crew Without the Chaos
The W-2 vs. 1099 decision is a focused analysis you’ll revisit as your business grows. The daily challenge — keeping your crew scheduled, your jobs dispatched, and your customers updated — is where most trade business owners quietly lose two or three hours every day.
Field service software closes that gap. If you’re at or near a team of two or more, Jobber is worth a free trial. It’s built for trades — plumbing, HVAC, roofing, electrical, cleaning — and takes the scheduling and admin load off your plate so you can focus on running jobs and growing revenue.